Pollaxe (Polearm)



The poleaxe is a type of European polearm which was widely used by medieval infantry. It is also known by the names pole-axe, pole axe, polax, and Hache (French meaning axe).

Etymology

Sometimes weapons such as the halberd, the bardiche or the Danish axe are mistakenly called pole axes as they are indeed axes mounted on poles, but many etymological authorities consider the poll- prefix historically unrelated to "pole", instead meaning "head."[1]

There are, however, etymologists, such as Eric Partridge who do believe that the word is derived from "pole".[2]

Types of poleaxe

Godfrey of Bouillon holds a short Poleaxe

The poleaxe design arose from the need to breach the plate armor of men at arms during the 14th and 15th centuries. Generally, the form consisted of a wooden haft some 4–6.5 feet (1.2–2.0 m) long, mounted with a steel head. It seems most schools of combat suggested a haft length comparable to the height of the wielder, but in some cases hafts appear to have been created up to 8 feet (2.4 m) in length.

The design of the head varied greatly with a variety of interchangeable parts and rivets. Generally, the head bore an axe or hammer upon the damaging 'face', with a spike, hammer, or fluke on the reverse. In addition, there was a projection from the top (often square in cross section) built somewhat like a dagger. The head was attached to the squared-off wooden pole by long flat strips of metal, which were riveted in place on either two or four of its sides, called langets. Also, a round hilt-like disc called a rondelle was placed just below the head. They also appear to have borne one or two rings along the poles length as places to prevent hands from slipping. Also of note is that the 'butt end' of the staff, which did not contain the weapon's 'head', bore a spike.

On quick glance, the poleaxe is often confused with the similar looking halberd. However, the 'axe blade' on a poleaxe seems to have been consistently smaller than that of a halberd. Furthermore, many halberds had their heads forged as a single piece, while the poleaxe was always modular in design.

Popular usage

The poleaxe in that spelling, refers to an animal culling device of similar appearance. It was swung so the spike struck the animal, normally cattle, in the forehead. Hence also the phrase 'to be poleaxed' referring to being stunned. This term does not seem to appear before the 19th century.


0 Responses

ss_blog_claim=2f583dbe3519c4d37b583aa56ef36f31 ss_blog_claim=2f583dbe3519c4d37b583aa56ef36f31